Suntube IV-SST Single-Stage

Stainless Steel Heaters Resist Wet, Humid and Corrosive Environments.

Single-stage tube heater for the harsh environment application.

Find A Local Rep

Proven system design – over 30 years

Heavy Duty 16 gauge 304L stainless steel combustion chamber and heat exchangers

Rugged 304L stainless steel burner and blower motor housing and cover

Simple chain mounting

CSA International Design Certified to ANSI/CGA Standards

Highly Polished 304L stainless steel reflectors

  • 91.7% reflectional efficiency (shape)

Rotatable reflector arrangements from 0° to 45°

  • Each reflector rotates independently

Burner fully assembled and tested – ready to hang

Factory installed wave turbulator for high efficiency

Safe, reliable operation

  • Durable direct spark ignition
  • 100% safety shut-off
  • Pre-purge cycle for safety
  • System validation light

Options:

  • Recessed Ceiling Kit
  • Side Reflector
  • 90° Elbow
  • “U”-Bend
  • “Y”-Couplers
  • Inlet and Exhaust Kits
  • 50 Hz for Worldwide Operation
  • Stainless Steel Construction

Manifold Operating Pressure
Natural Gas and LP/Propane:

  • 40-100 MBTUH – 3. 5 inches WC
  • 105-200 MBTUH – 5 inches WC

Minimum Inlet Pressure
Natural Gas:

  • 40-125 MBTUH – 6 inchesWC
  • 130-200 MBTUH – 7 inches WC

LP/Propane:

  • All MBTUH – 11 inches WC

Maximum Inlet Pressure
Natural Gas and LP/Propane: 14 inches WC
1/2 inch FPT Gas Inlet

Electrical Rating
120 VAC – 60 Hz – 1 Phase
Blower: 1/24 h.p. motor
1.30 max. amp. draw at 138 cfm/free air

Warranty
10 year limited warranty on Burner Core
5 year limited warranty on All Combustion and Heat Exchanger tubes
1 year limited warranty on All Burner Controls