Compact Infrared Tube Heater (Discontinued)

Heater

• CSA International Design Certified to ANSI/CGA Standards
• Compact size: Fits standard 2 feet x 4 feet ceiling panel grids
• Low clearances to combustibles
• Pre-assembled: Just hang and connect
• Simple chain hanging arrangement
• Multi-poise mounting: Horizontal to 45°
• Mirror Brite highly polished reflector for maximum reflectivity
• Corrosion resistant: All aluminized steel
• Natural or Propane Gas
• Positive pressure intermittent blower with pre-purge and post-purge cycles
• Screened inlet air opening
• Indoor or outdoor combustion air through wall or roof
• Vented or unvented exhaust
• 20 feet maximum linear (straight) length of vented exhaust (One 3-inch elbow = 5 linear feet)
• Dry operating: no condensation of flue products during steady-state operations

Control Package and Burner

• 120 VAC – 1 Phase – 60 Hz
• Factory wired 36-inch long, 3-prong electrical power cordset
• Replaceable Panel Fuse, 6/10 A – No tools required
• Burner observation port for flame and ignition
• 24 VAC – 1 Phase – 60 Hz thermostatic control
• External terminal board for easy field wiring of thermostat
• Pre-purge time: 15 seconds. Post-purge time: 120 seconds
• Direct spark ignition: 100% safety shut-off
• All controls enclosed in removable control package

Combustion Chamber/Heat Exchanger

• 2.75” O.D. special serpentine shaped tubing: 15 linear feet equivalent
• 14 gauge Aluma-Therm steel (aluminized titanium steel), 1.864 pounds per linear foot
• 0.72 square feet of radiant surface per linear foot
• Wave formed turbulator for increased efficiency